CSPA Signed for Idenburg Advanced High Grade Gold Project
Released
Released
Announcement PDF
IDENBURG GOLD
GOLD PROJECT
PROJECT ACQUISITION
ACQUISITION
IDENBURG GOLD PROJECT CSPA
SIGNED
ACQUISITION
ASX ANNOUNCEMENT
09
11 OCTOBER
JULY 2024 2024
CONDITIONAL SHARE PURCHASE AGREEMENT SIGNED
TO AQUIRE ADVANCED HIGH GRADE IDENBURG GOLD
PROJECT
The directors of Far East Gold Ltd (ASX:FEG) (FEG or the Company) are pleased to announce the
execution of the Conditional Share Purchase Plan (CSPA) with PT Iriana Mutiara Idenburg (IMI) for
the acquisition of up to 100% of the advanced high grade highly prospective Idenburg gold project, a
95,280 Ha Contract of Work (CoW) located in Papua province of Indonesia (Idenburg). This is an
exciting milestone allowing the Company, subject to satisfaction of conditions precedent, to take an
initial 51% ownership of Idenburg.
HIGHLIGHTS:
•
Conditional Share Purchase Agreement (CSPA) signed for the acquisition of the highly
prospective 95,280 Ha 6th generation CoW located in the same province hosting world class
multi-million- ounce gold and copper deposits including Grasberg (+70 Moz Au), Porgera
(+7 Moz Au), Frieda River (20 Moz Au) and Ok Tedi (20 Moz Au). (For further details, please
refer to our announcement on 15 July 2024).
•
Acquisition from the Company’s existing Indonesian partner, with whom the Company has
had had a long standing and successful relationship, via the Company’s Woyla project.
•
FEG is now well-funded and poised to accelerate the growth of our exciting portfolio.
Commenting on the execution of the CSPA for the Idenburg gold project Managing Director
Shane Menere said:
“The Idenburg acquisition catapults FEG into the realm of a Tier 1 world class asset holding portfolio.
The project boasts excellent logistics by way of the project area being intersected by the national
highway and located only a few hours’ drive from the capital of Jayapura. Add to that, a very pleasing
independent exploration target, excellent recoveries and metallurgies of greater than 95%, a highly
experienced in-country team, and a recent partnership with strategic investor Xingye group, and I feel
we are well positioned for rapid company-wide project development. All these ingredients have come
together at the right time for FEG to capitalize on the strong market outlook for gold. This is very
exciting times for Far East Gold.”
FAR EAST GOLD ASX ANNOUNCEMENT
1
IDENBURG GOLD PROJECT ACQUISITION
IDENBURG GOLD PROJECT CSPA SIGNED
SAMPLES OF HISTORICAL EXPLORATION RESULTS AND SIGNIFICANT INTERCEPTS:
Sua Prospect: 22 Holes (2,629m):
-
KSD001: 16m @ 2.38 g/t Au from 0m and;
-
KSD002: 7.5m @ 16.0 g/t Au from 21m, including 1.6m @ 52.5 g/t Au and;
-
KSD004: 1m @ 33.8 g/t Au from 123m.
-
KSD005: 9m @ 4.0 g/t Au from 80m, including 1m @ 25.8 g/t Au.
5m @ 21.8 g/t Au from 107m; including 3m @ 35.0 g/t Au from 107m.
-
KSD010: 18m @ 2.05 g/t Au from 0m and;
3m @ 17.7 g/t Au from 55m
-
-
KSD022: 17m @ 2.88 g/t Au from 0m and:
Channel Samples:
3m @ 73.1g/t Au;
6m @ 43.7g/t Au;
4m @ 52.0g/t Au;
3m @ 65.0g/t Au and
2m @ 83.9g/t Au.
Mafi Prospect: 23 Holes (1,642m):
-
003MD00: 15.5m @ 2.27 g/t Au from 0m.
-
014MD00: 12.6m @ 8.01 g/t Au from 6m; including 1.25m @ 25.7 g/t Au from 15.75m.
8.1m @ 7.50 g/t Au from 14.4m; Including 1.4m @ 16.3 g/t Au from 18m.
-
Channel samples:
8m @11.0g/t Au
-
Outcrop: 1,018g/t
Bermol Prospect: 7 holes (771m):
-
BRD001: 5m @ 5.40 g/t Au from 16m; including 2m @ 11.8 g/t Au from 17m.
-
BRD003: 5m @ 4.15 g/t Au from 46m; Including 3m @ 7.08 g/t Au from 46m.
-
BRD006: 7m @ 2.78 g/t Au from 65m; Including 4m @ 4.15 g/t Au from 66m.
-
BRD007: 3m @ 4.89 g/t Au from 0m.
FAR EAST GOLD ASX ANNOUNCEMENT
2
IDENBURG GOLD PROJECT ACQUISITION
IDENBURG GOLD PROJECT CSPA SIGNED
Figure 1: Map showing the location of the Idenburg COW in Papua Indonesia relative to the locations of world class multimillion
ounce gold-rich porphyry copper deposits
FAR EAST GOLD ASX ANNOUNCEMENT
3
IDENBURG GOLD PROJECT ACQUISITION
IDENBURG GOLD PROJECT CSPA SIGNED
Figure 1: Idenburg project area showing numerous prospects with high grade gold intersected in surface samples and drill holes.
Historical exploration by IMI reports surface rock assays of up to 1,018 g/t Au, 737 g/t Au, 270 g/t Au and 312 g/t Au from the Mafi
prospect area. All of the areas shown in the figure are contained within the current COW.
FAR EAST GOLD ASX ANNOUNCEMENT
4
IDENBURG GOLD PROJECT ACQUISITION
IDENBURG GOLD PROJECT CSPA SIGNED
COMMERCIAL TERMS FOR ACQUISTION OF IDENBURG
FEG’s Exclusivity Period
•
•
BTS payment AUD $150,000 (PAID).
3 months exclusivity to complete a binding Conditional Share Purchase Agreement
FEG’s Move to 51%
•
•
•
•
Payment of AUD $250,000 upon signing of CSPA
Issue at least 2,500,000 fully paid shares in FEG to the vendors based on a valuation
and issue price of at least AUD $0.10 per share (or $250,000 worth of shares,
whichever is greater).
Spend AUD $5M within 24 months of signing of CSPA or deposit of funds into a
working account for use towards the project.
Issue AUD $6.5M worth of shares. (Subject to shareholder and regulatory approvals).
FEG’s Move to 80%
•
Completion of a feasibility study in Indonesia (Indonesian Feasibility Study) to allow
the CoW to move from exploration phase to a 30 year mining operation phase.
FEG’s Move to 100%
•
Vendors may elect to have the remaining 20% economic interest either carried on
terms to be agreed in the CSPA or convert to a 2% Net Smelter Royalty.
•
Shareholders loan in the amount of USD $16M to be repaid from future operating
proceeds, at the election of the vendors either preferentially out of cashflow or, subject
to FEG’s agreement at the time, a combination of 50% cash and 50% shares calculated
at the 30 day VWAP.
Milestone payment
•
Upon announcement to the ASX, not later than 5 years from signing, of at least
1,000,000 ounces of gold to a JORC Code mineral resource estimate standard with a
minimum average gold grade of 0.5 grams per tonne, FEG to issue 13,000,000 fully
paid shares. (Subject to shareholder and regulatory approvals).
FAR EAST GOLD ASX ANNOUNCEMENT
5
COMPETENT PERSON’S STATEMENT AND PREVIOUSLY REPORTED INFORMATION
ASX Announcements referenced directly in this release
ASX: FEG 15 July 2024 Binding Term Sheet Signed to Acquire Advanced High Grade Idenburg Gold Project
The information in the referenced announcements above that relate to Exploration Results has previously been
released on the ASX. The Company confirms it is not aware of any information or data that materially affects
the information included in the original market announcements and that all material assumptions and
technical parameters underpinning the announcements continue to apply. The Company confirms that the
form and context in which the Competent Person’s findings are presented have not been materially modified
from the original market announcements.
The information in this report relates to the results of historical exploration within the Idenburg COW as
compiled and reported by SMG Consultants in the report entitled ‘Pt. Iriana Mutiara Idenburg Exploration
Targeting Report June 2024’. Excerpts from that report are included here-in in the form and context in which
they were reported. Michael C Corey, who is a Member of the Association of Professional Geoscientists of
Ontario, Canada has prepared this report summary. Michael Corey is employed by the Company and has
sufficient experience which is relevant to the style of mineralisation and type of deposit under consideration and
to the activity which he is undertaking to qualify as a Competent Person as defined in the 2012 Edition of the
‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’.
ABOUT FAR EAST GOLD
Far East Gold Limited (ASX: FEG) is an ASX listed copper/gold exploration company with six advanced projects
in Australia and Indonesia. This Release has been approved by the FEG Board of Directors.
FURTHER INFORMATION:
To receive company updates and investor information from Far East Gold, register your details on the investor
portal: https://fareastgold.investorportal.com.au/register/
COMPANY ENQUIRIES
Justin Werner
Chairman
e: justin.werner@fareast.gold
MEDIA ENQUIRIES
Ally Leiba
IR Executive
Reach Markets
e: IR@reachmarkets.com.au
Shane Menere
Chief Executive Officer
Tim Young
Investor Relations & Capital Markets
e: shane.menere@fareast.gold
m: + 61 406 189 672
+ 62 811 860 8378
e: tim.young@fareast.gold
m: + 61 484 247 771
APPENDIX 1
Significant Intersection Tables for Sua, Mafi and Bermol Prospect Areas
1. Significant Drill Hole Intercepts From the Second Drill Program at Sua (0.5 g/t Au Cut-Off, 41
g/t Au Top Cut, Maximum Internal Waste of 2m)
2. Significant Drill Hole Intercepts From the Drill Program at Mafi (0.5 g/t Au Cut- Off, 50 g/t
Au Top Cut, Maximum Internal Waste of 2m)
3. Significant Drill Hole Intercepts From the Scout Drill Program at Bermol (0.5 g/t Au CutOff, 15 g/t Au Top Cut, Maximum Internal Waste of 2m)
JORC Code, 2012 Edition – Table 1
Section 1 Sampling Techniques and Data (Criteria in this section apply to all succeeding sections.)
Criteria
Sampling
techniques
Drilling
techniques
JORC Code explanation
Commentary
• Nature and quality of sampling (eg cut channels,
random chips, or specific specialised industry standard
measurement tools appropriate to the minerals under
investigation, such as down-hole gamma sondes, or
handheld XRF instruments, etc). These examples should
not be taken as limiting the broad meaning of sampling.
• Include reference to measures taken to ensure sample
representivity and the appropriate calibration of any
measurement tools or systems used.
• Aspects of the determination of mineralisation that are
Material to the Public Report.
• In cases where ‘industry standard’ work has been
completed this would be relatively simple (eg ‘reverse
circulation drilling was used to obtain 1 m samples from
which 3 kg was pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation may be required,
such as where there is coarse gold that has inherent
sampling problems. Unusual commodities or
mineralisation types (eg submarine nodules) may warrant
disclosure of detailed information.
• All drill core was digitally photographed and
logged by project geologists. Core with any
potential for mineralisation was marked up for
sampling and despatched to an analytical
laboratory for geochemical analysis. Only
obvious non- mineralised core was not
sampled.
• Half core was selected for geochemical
analysis.
• The 2007 drill core sample intervals range
from 1.00 to 2.00 m with an average interval
of 1.38 m.
• All half-core samples were packed into
woven polysacks by experienced site
personnel and air freighted to the Sucofindo
Laboratory in Timika, Papua Province,
Indonesia.
• All sample preparation and assays were
undertaken by the independent Sucofindo
Laboratory in Timika, Indonesia (Freeport
Industrial Park).
• Gold analyses of all drill core samples were
by fire assay with atomic absorption
spectrometry (AAS) finish of a 50g sample,
with a detection limit of 0.01 g/t Au (method
FAS4AAS). For the determination of base
metal AAS analytes the Sucofindo GAM006 –
Base Metal Determination method was used
with detection limits of Ag (0.5 ppm) and Cu,
Pb, Zn (each 5 ppm). For the determination
of AAS hydride analytes the Sucofindo
GAM004 – Hydride Base Metal Determination
method was used with a 1.00 ppm detection
limit for Arsenic
• Triple tube diamond core drilling – fully drilled
with a diamond bit without RC pre- collar.
• Core diameter was mostly HQ, reducing to NQ
at depth.
• Down-hole surveying was routinely
conducted at 30 m intervals during 2006 and
2007 drilling.
• Drill type (eg core, reverse circulation, open-hole hammer,
rotary air blast, auger, Bangka, sonic, etc) and details (eg
core diameter, triple or standard tube, depth of diamond
tails, face-sampling bit or other type, whether core is
oriented and if so, by what method, etc).
Criteria
JORC Code explanation
Commentary
• Core was fitted together and marked up for
sampling by a geologist, and where loose
fragments were seen core was wrapped in
Drill sample
recovery
• Method of recording and assessing core and chip sample
recoveries and results assessed.
• Measures taken to maximise sample recovery and
ensure representative nature of the samples.
• Whether a relationship exists between sample recovery
and grade and whether sample bias may have occurred
due to preferential loss/gain of fine/coarse
• All core sample recovery recorded in
logging sheet and recovery results were
assessed by project geologists.
• No significant drilling problems
encountered resulted in very good core
recoveries.
• Statistical analyses indicate no relationship
Logging
• Whether core and chip samples have been
geologically and geotechnically logged to a level of detail
to support appropriate Mineral Resource estimation,
mining studies and metallurgical studies.
• Whether logging is qualitative or quantitative in nature.
Core (or costean, channel, etc) photography.
• The total length and percentage of the relevant
• For all sample types, the nature, quality and
appropriateness of the sample preparation technique.
• Quality control procedures adopted for all sub-sampling
stages to maximise representivity of samples.
• Measures taken to ensure that the sampling is
representative of the in-situ material collected,
including for instance results for field duplicate/secondhalf sampling.
• All drill holes were logged by geologists.
• All logging data recorded intervals from and
to, including lithology, mineralisation,
alteration, sulphides cited, detailed structure,
and geotechnical characteristics.
• All core was photographed.
• All samples that were identified as having
any potential mineralisation were assayed.
• Core samples were logged and all intervals
for analysis were marked up by IMI
geologists, mostly at 1 metre intervals.
• Core samples for analyses were cut in half
and collected by experienced IMI
personnel.
• 2007 drill core sample intervals ranged
from 1.00 to 2.00 m with an average
interval of 1.38 m.
• Selected quarter core samples were
assayed for quality assurance and quality
control analysis.
Sub-sampling
techniques and
sample
preparation
• If core, whether cut or sawn and whether quarter, half or
all core taken.
• If non-core, whether riffled, tube sampled, rotary split, etc
and whether sampled wet or dry.
• For all sample types, the nature, quality and
appropriateness of the sample preparation technique.
• Quality control procedures adopted for all sub-sampling
stages to maximise representivity of samples.
• Measures taken to ensure that the sampling is
representative of the in-situ material collected,
including for instance results for field duplicate/secondhalf sampling.
• Core samples were logged and all intervals
for analysis were marked up by IMI
geologists, mostly at 1 metre intervals.
• Core samples for analyses were cut in half
and collected by experienced IMI
personnel.
• 2007 drill core sample intervals ranged
from 1.00 to 2.00 m with an average
interval of 1.38 m.
• Selected quarter core samples were
assayed for quality assurance and quality
control analysis.
Quality of assay
data and
laboratory tests
• The nature, quality and appropriateness of the assaying
and laboratory procedures used and whether the
technique is considered partial or total.
• For geophysical tools, spectrometers, handheld XRF
instruments, etc, the parameters used in determining
• All samples were dispatched to an
independent laboratory – Sucofindo
Laboratory, Timika, Indonesia.
• No QA/QC was conducted in the field at all
stages of exploratory sampling.
• If core, whether cut or sawn and whether quarter, half or
all core taken.
• If non-core, whether riffled, tube sampled, rotary split, etc
and whether sampled wet or dry.
Sub-sampling
techniques and
sample
preparation
Criteria
Verification of
sampling and
assaying
Location of
data points
JORC Code explanation
Commentary
• Nature of quality control procedures adopted
(eg standards, blanks, duplicates,
external
laboratory checks) and whether acceptable
• Analysis by Sucofindo of replicate assays and
duplicate pulp check assays indicate acceptable
levels of accuracy and precision.
• The verification of significant intersections by
either independent or alternative company
personnel.
• The use of twinned holes.
• Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
• Twinned holes were considered superfluous during the
initial Resource drilling phases.
• Data entry involved constructing Excel spreadsheets
directly from final laboratory assay reports delivered
electronically in Excel format.
• Database verified by IMI exploration supervisor and JV
funding Chief Geologist, including all significant drill
drill intersections.
• Data stored in a company server located in Jakarta,
Indonesia.
• Soil sampling grid (Northing, Easting, and Elevation) was
established with handheld GPS control and tape and
compass surveyed in the rugged terrain.
• There is no clear information on whether the borehole
collars to date have been surveyed using standard total
station techniques or GPS handheld equipment. This has
no effect on the Exploration Target estimation.
• Both Sua and Bermol have been topographically
surveyed by site surveyors with a soil sampling grid
established and surveyed over the project. Survey data
of creek locations, ridges, and spot heights were also
collected and all survey data was used to create the
topography DTM.
• The existing topographic survey is considered adequate
• Accuracy and quality of surveys used to locate
drill holes (collar and down-hole surveys),
trenches, mine workings and other locations
used in Mineral Resource estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic control.
Data spacing
and distribution
• Data spacing for reporting of Exploration
Results.
• Whether the data spacing and distribution is
sufficient to establish the degree of geological
and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications applied.
• Whether sample compositing has been applied.
• Drill hole spacing and drill section spacing were as close
to 100 m as the rugged ground conditions allowed.
• Drilling has verified the mapping and trenching with the
confirmation of both strike and dip continuity of goldbearing quartz veins at depth. Although the drilling
density is insufficient to allow a detailed model of the
quartz veins it is adequate to define the overall geometry
of the veins.
Orientation of
data in relation
• Whether the orientation of sampling
achieves unbiased sampling of possible
structures and the extent to which this is
• Drill sections are oriented perpendicular to main strike
of shallow dipping vein structures.
• Most holes were drilled on section.
Criteria
JORC Code explanation
Commentary
to geological
structure
• If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to have
introduced a sampling bias, this should be
• Vertical and mostly inclined holes were drilled,
depending on the orientation of the mineralisation.
• The orientation of the drilling is considered adequate for
an unbiased assessment of the deposit with respect to
interpreted structures and control on mineralisation
• All drill core samples were packed on-site into polysacks
by experienced IMI personnel before being helicopter
delivered to the IMI logistic depot near Jayapura Airport
and air-freighted by Boeing 737 to the Sucofindo
Laboratory in Timika, Indonesia.
• All sample preparation and assaying were undertaken at
the independent, internationally recognised, Sucofindo
Laboratory, Timika, Papua Province, Indonesia.
• The measures taken to ensure sample
security.
Sample
security
• The results of any audits or reviews of
sampling techniques and data.
Audits or
reviews
• Sampling procedures and data collection were frequently
reviewed particularly
during regular site visits and
quarterly (every three months) Idenburg operating
committee meetings
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria
JORC Code explanation
Commentary
Mineral
tenement and
land tenure
status
• Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national
park and environmental settings.
• PT. Iriana Mutiara Idenburg (IMI) holds an
Exploration Contract of Work (COW) granted on the
13th of December 2017.
• Project Area covers 95,280 hectares.
• Acknowledgment and appraisal of exploration by
other parties.
• All known mineral prospects have been located by
current and past IMI tenure holders.
• Acknowledgment and appraisal of exploration by other
parties including Barrick Gold Corporation and Avocet
Mining under Joint Venture, Placer Dome under
Exclusive Option Period, and Minorco, Newcrest
Mining, and Newmont Mining under confidential due
diligence investigations.
• Deposit type, geological setting and style of
mineralisation.
• All gold prospects are located within the exotic
Idenburg Inlier terrane, an approximately 30km x
30km block of amphibolite facies metamorphic rocks
hosting dismembered ophiolites emplaced along
regionally extensive thrust faults.
• The tectonic setting is on the edge of the Pacific Rim,
in the complex collisional zone between the northward
creeping Australian continental plate and oceanic
Pacific Plate drifting to the southwest.
• Style of gold mineralisation as determined from field
observations including mapping and drill core logging
is of the orogenic gold type, also referred to as
mesothermal lode gold.
• Repeated petrographic investigations suggest the
presence of auriferous, sheared quartz veins in
metamorphic rocks with alteration assemblages seen and
fluid inclusion homogenisation temperatures indicate that
orogenic lode gold deposits are present.
• As discussed in Section 4 and 5 of this report.
Exploration done
by other parties
Geology
Drill hole
Information
• A summary of all information material to the
understanding of the exploration results
including a tabulation of the following information
• The Exploration COW is valid up to 26 October 2026.
Criteria
JORC Code explanation
Commentary
-
elevation or RL (Reduced Level –
elevation above sea level in
metres) of the drill hole collar
- dip and azimuth of the hole
- down-hole length and interception
depth
- hole length.
• If the exclusion of this information is
Data aggregation
methods
• In reporting Exploration Results, weighting
averaging techniques, maximum and/or
minimum grade truncations (eg cutting of
high grades) and cut-off grades are
usually Material and should be stated.
• Where aggregate intercepts incorporate
short lengths of high grade results and
longer lengths of low grade results, the
• Significant intercepts were calculated using a 0.5 ppm
lower cutoff at Mafi and
0.8 ppm Au at all other prospects, 100 ppm uppercut,
maximum consecutive waste 1 m.
• No metal equivalent values considered.
• Refer attached Excel spreadsheet Significant Drill
Intersections_IMI.
Relationship
between
mineralisation
widths and
intercept lengths
• These relationships are particularly
important in the reporting of
Exploration Results.
• If the geometry of the mineralisation with
respect to the drill hole angle is known,
its nature should be reported.
• If it is not known and only the down-hole
lengths are reported, there should be a
• The drill targets were tested with the aim of intersecting
the interpreted mineralised structure as perpendicularly
as possible to the strike, based on the geological
interpretation available usually from surface creek
mapping and mapping of trench and channel exposures.
Mineralised zones were generally intersected at angles of
greater than 60 degrees to the dip, which will cause a
slight overstatement of the true mineralised width.
Diagrams
• Appropriate maps and sections (with
scales) and tabulations of intercepts
should be included for any significant
discovery being reported These should
• All maps, tables, and diagrams are identified in the
Table of Contents of this report under the headings
“Tables”, “Figures” and “Appendices”.
Balanced
reporting
• Where comprehensive reporting of all
Exploration Results is not practicable,
representative reporting of both low and
• Results from all holes in the historic programs for
which assays have been received are reported.
• Other exploration data, if meaningful and
material, should be reported including
(but not limited to): geological
• A 30,595 line km fixed-wing aeromagnetic survey was
flown, clearly outlining the regional extent of the exotic
Idenburg Inlier terrain.
Other
substantive
exploration data
Criteria
JORC Code explanation
metallurgical test results; bulk density,
groundwater, geotechnical and rock
characteristics; potential deleterious or
contaminating substances.
Further
work
• The nature and scale of planned further
work (eg tests for lateral extensions or
depth extensions or large-scale step-out
drilling).
• Diagrams clearly highlighting the areas of
Commentary
• Regional drainage sampling has been completed over the entire
remaining Project Area at a sampling density of just over 1 sample per
5 sq. km. At each stream site a -80# stream sediment, panned
concentrate, and BLEG sample were collected, along with any
mineralised rock float or rock outcrops.
• The BLEG samples were assayed for Au, Ag, and Cu. The silt and rock
samples were assayed for Au, Ag, Cu, Pb, Zn, Mo, Sb, Hg, Bi, Ni, Co,
K, and Cr.
• Lithostructural interpretations from air photos and Landsat imagery.
• Compilation of all geochemical, geological, and geophysical data into a
GIS database initially in ArcView format.
• Preliminary metallurgical test work, on surface samples and on drill core
composites from the Sua district show that 50 to 60% of the contained
gold is recoverable by gravity, while overall recoveries by carbon-inleach (CIL) or resin- in-leach (RIL) processes exceed 95%. Preliminary
work on Bermol samples suggested minimum gold recoveries by CIL
exceeding 80%.
• Future Resource definition drilling is planned to extend, and infill known
mineralised zones, and to delineate additional mineralised zones within
the Idenburg Exploration COW Project Area.
Share your feedback
Discover