Idenburg Project Fifth Consecutive High Grade Gold Intercept
Released
Released
Announcement PDF
IDENBURG PROJECT
SUA PROSPECT - BONANZA GRADES EXTENDED
FAR EAST GOLD ASX ANNOUNCEMENT 1
IDENBURG PROJECT
SUA PROSPECT - BONANZA GRADES EXTENDED
IDENBURG PROJECT UPDATE: SUA PROSPECT
Fifth Consecutive High-Grade Gold Intercept
Far East Gold Limited (ASX: FEG) is pleased to announce assay results from diamond drillhole
KSD027, the fifth drillhole to receive assays from the Company’s ongoing drill program at the Idenburg
Gold Project - Sua Prospect area in Papua, Indonesia.
KSD027 is a 50m step-out hole from previously reported drillholes KSD025 and KSD026. The results
confirm a 50m lateral extension of high-grade gold zones intersected in holes KSD025 and KSD026.
HIGHLIGHTS
KSD027 delivers multiple high-grade and bonanza-grade gold intervals. Significant assays include:
• 8.55 g/t Au over 1.7m (from 14.4m), including 20.28 g/t Au over 0.7m (from 14.4m)
• 49.47 g/t Au over 4.85m (from 73.85m), including:
▪ 62.12 g/t Au over 3.85m (from 73.85m); and
▪ 93 g/t Au over 1.0m (from 74.5m); and
▪ 175 g/t Au over 0.55m (from 77.15m)
• 11.2 g/t Au over 0.5m (from 96.15m)
• 5.51 g/t Au over 0.80m (from 112.9m)
The high-grade zone intersected in KSD027 remains open down-dip and along strike to the
northeast. FEG’s Sua drilling has consistently returned high-grade gold:
• 19 of 22 historic drillholes at Sua intersected gold mineralisation.
• All five FEG diamond drillholes reported to date (KSD023–KSD027) have intersected high-grade
gold within multiple stacked quartz–sulphide veins. Previously reported highlights (see the
Company’s ASX announcement dated 17 December 2025) include:
▪ KSD023: 13.77 g/t Au over 9.8m (from 18.5m) including 131 g/t Au over 0.8m (from 24.5m)
▪ KSD024: 8.59 g/t Au over 35.5m (from 23.5m) including 252.50 g/t Au over 0.8m (from 24.5m)
▪ KSD025: 8.42 g/t Au over 7.7m (from 106.3m) including 35.29 g/t Au over 0.6m (from 111.7m)
▪ KSD026: 8.82 g/t Au over 4.5m (from 120m) including 51 g/t Au over 0.5m (from 122.5m)
FEG’s Non-Executive Chairman, Mr Justin Werner stated: “KSD027 confirms that high-grade gold
continues below the historic intercepts and within numerous veins. This is the pattern we wanted to
see at Sua in an orogenic lode system – continuity of structure and grade down-dip and along strike.
The more holes we drill, the more confidence we gain that Sua is a highly fertile gold system with
substantial untested potential.”
ASX ANNOUNCEMENT
12 JANUARY 2026
IDENBURG PROJECT
SUA PROSPECT - BONANZA GRADES EXTENDED
FAR EAST GOLD ASX ANNOUNCEMENT 2
KSD027 SUMMARY AND PROGRAM-TO-DATE CONTEXT
The Sua vein system occurs within the ~5 km long Sua–Afley shear zone and is considered highly
prospective for additional high-grade discoveries. A review and discussion of historical exploration
and assessment of resource potential can be found in the Company’s ASX announcement dated 21
August 2024.
FEG’s Idenburg Project hosts a JORC (2012) inferred Mineral Resource estimate of approximately
540,000 oz Au, at an average grade of 4.1 g/t Au including an estimated 296,000 oz Au at an
average grade of 3.7 g/t Au within the Sua Prospect (see Appendix 1, Table 1).
Historic and FEG drilling to date at Sua comprise 32 diamond drillholes (22 historic + 10 FEG) for a
total of 4,465m, with gold mineralisation intersected in 19 of 22 historic holes within the current
resource footprint. Including FEG’s drilling, 24 of 27 holes assayed to date have intersected gold
mineralisation.
Diamond drillhole KSD027 was designed to further test the high-grade quartz–sulphide vein system
at Sua within the existing resource footprint. The hole intersected multiple high-grade and bonanza-
grade gold intervals, including a broad zone of 49.47 g/t Au over 4.85m (73.85–78.7m) with internal
bonanza-grade sub-intervals up to 175 g/t Au over 0.55m (77.15–77.7m). Additional high-grade
zones were intersected near surface (8.55 g/t Au over 1.7m) and at depth (11.2 g/t Au over 0.5m).
KSD027 is the fifth hole from the Company’s initial 10-hole diamond drill program at the Sua Prospect
within the Idenburg Contract of Work in Papua, Indonesia. The results confirm a 50 m lateral extension
of the high-grade zones intersected in holes KSD025 and KSD026. To date, assays have been
received for 5 of the 10 holes completed by the Company at Sua.
Hole KSD026 intersected a 4.5m thick zone grading 8.82 g/t Au from 120m, including 51 g/t Au over
0.5m. These results confirmed the down-dip extension of the high-grade zone intersected in historical
hole KSD008 (refer to the Company’s ASX announcement dated 15 December 2025).
The results from KSD027 are significant in that the high-grade zones intersected were not reported
from historical holes KSD012 and KSD016, which were drilled on the same section and intersected
the same zone up-dip at shallower depth. No significant assays were reported from hole KSD012, and
hole KSD016 intersected four distinct zones of low-grade (<1 g/t Au) mineralisation ranging from 2 to
16m in thickness.
Results from KSD027 indicate that weakly mineralised zones intersected near surface can host
significantly higher grades at depth. The high-grade zone intersected in KSD027 remains open
down-dip and along strike to the northeast.
Importantly, the high gold grades come from mineralised zones that show little or no supergene
alteration and are associated with very low arsenic concentrations.
IDENBURG PROJECT
SUA PROSPECT - BONANZA GRADES EXTENDED
FAR EAST GOLD ASX ANNOUNCEMENT 3
To view the announcement on our investor hub, click here https://fareast.gold/link/P76LXr
The Company’s Head of Exploration, Mr Tedy Setiabudi has released a video discussing this
announcement. Watch the video on our investor hub here: https://fareast.gold/link/eolgbr
Figure 1: Map showing prospect and resource areas within the Idenburg COW tenement. FEG drilling is currently in
progress within the Sua and North Bermol prospect areas. The areas of announced PIPPIB forest reclassification are
also indicated. Refer to Appendix 1Table 1 for details of the JORC2012 Inferred Mineral Resource Estimate for Idenburg
as completed by SMGC. Coordinates are referenced to datum WGS84, zone 54 south.
IDENBURG PROJECT
SUA PROSPECT - BONANZA GRADES EXTENDED
FAR EAST GOLD ASX ANNOUNCEMENT 4
To date, 10 holes (KSD023 to 032) for 1,836m have been drilled by the Company at the Sua prospect
(Table 1). This completes the planned initial drill program at Sua. The program confirmed the
occurrence of high-grade gold zones intersected by historical drilling and also the extension of the
zones to depth and along strike. Given the success of the initial drill program the Company has
approved a focused extension to the Sua drill program which comprises 5 additional diamond holes
for a total planned meterage of 1,360m. Refer to the Company’s ASX announcement of 17 December
2025.
Assays are pending from the remaining 5 drillholes (KSD028-032) which were located to expand the
current defined mineral resource area an additional 150m along strike to the northeast and extend
historical mineralised zones an additional 50m down-dip over the current defined resource area
(Figure 2).
Figure 2: Image showing the Sua prospect area and thelocations of completed FEGdrillholes (KSD023 to 032). Assays have
been received for FEG holes KSD023-027). Also shown areplanned holes(yellow italics)that will test thedowndip extension of
defined mineralised zones. Table 1 lists hole collar details for the FEG holes completed and Table 2 lists compiled significant
intersections for hole KSD027. Coordinates are referenced to datum WGS84, zone 54 south.
IDENBURG PROJECT
SUA PROSPECT - BONANZA GRADES EXTENDED
FAR EAST GOLD ASX ANNOUNCEMENT 5
Table 1: Collar details for FEG drill holes completed within the Sua Prospect area as of December 9, 2025. Coordinates are
referenced to datum WGS84, zone 54 south. Refer to Figure 2 for drill hole locations.
Assay results and interpretation for the first 4 holes KSD023 to KSD026 are provided in the Company’s
ASX announcements of 10 November 2025, 24 November 2025 and 15 December 2025. Holes
KSD023 and KSD024 intersected a zone of high-grade gold associated with coarse visible gold
indicating the potential to both upgrade and increase the current mineral resource estimate at Sua
through a broader infill drill program, Refer to Table 2. The high-grade zones intersected in these
holes remain open along strike and to depth.
An interpreted cross section for hole KSD027 is shown in Figure 3 and a selection of core photos from
the highlighted mineralised zone is provided in Figure 4. Higher-grades of gold mineralisation are
consistently associated with an increase in late-stage, coarse pyrite. A long section along the same
section line as KSD027 is shown in Figure 5. The intersected high grade gold zone was also tested
by holes KSD028 and KSD029.
IDENBURG PROJECT
SUA PROSPECT - BONANZA GRADES EXTENDED
FAR EAST GOLD ASX ANNOUNCEMENT 6
Figure 3: Interpreted cross section (looking Northeast) showing the trace of hole KSD027 and historical holes KSD009,
012, and 016... Refer to Tables 1, 2 and 3. Refer to Company’s ASX announcement of October 12, 2025, for complete list
of significant intersections for the Sua historical drillholes. Coordinates are referenced to datum WGS84, zone 54 south.
Compiled significant assay intervals for FEG drillhole KSD027and the historical hole KSD016 are
provided in Table 2. No significant assays were reported from historical holes KSD009 and KSD012.
Table 3 provides individual assays for samples taken from the interval 73.85 to 78.7m. High grade
gold mineralisation is associated with intense multiphase deformation, quartz veins and what appears
to be a late-stage, overprint of coarse pyrite. The zone remains open to depth and laterally. The type
and style of the high grade mineralisation intersected is consistent with that reported on from holes
KSD023 to KSD026. Importantly the high gold grades come from mineralised zones that show little or
no supergene alteration and are associated with very low arsenic (As) concentration (<100ppm).
IDENBURG PROJECT
SUA PROSPECT - BONANZA GRADES EXTENDED
FAR EAST GOLD ASX ANNOUNCEMENT 7
Table 2: Compiled significant intersections from FEG drillhole KSD027 and historical hole KSD016. Refer to Figure 3. No
significant intersections were reported from historical holes KSD009 and 012. Refer to Table 3 for individual assay results
for the 73.85 to 78.7m. Significant Intersections were compiled using weighted averages and using a 0.2 g/t Au cut-off
with no grade top cut. A maximum of 3 meters of internal dilution was included. Refer to Table 1 for hole collar details.
Reported intersection widths are interpreted to represent true thickness.
Based on their assessment of the historical data SMGC estimated an inferred mineral resource
of 2.5 million tonnes at an average grade of 3.7 g/t gold (Au) for a total of 296,000 ounces of gold
within the Sua prospect. Refer to the SMGC report titled ‘JORC Resource Report, PT Iriana Mutiara
Idenburg, November 2024’ released by the Company in ASX announcement of November 14, 2024.
Refer to resource compliance statement in Appendix 1.
IDENBURG PROJECT
SUA PROSPECT - BONANZA GRADES EXTENDED
FAR EAST GOLD ASX ANNOUNCEMENT 8
Figure 4: Photos of drill core from drillhole KSD027. Refer to Tables 2 and 3. A) Deformed and chloritized metadiorite at
right with abundant coarse pyrite that appears to have formed along shear foliation planes. From KSD027 assay interval
of 93 g/t Au over 1m from 74.5 to 75.5m (sample BDO17231), B) Intensely chloritized metadiorite with coarse pyrite. From
KSD027 assay interval of 22.96 g/t Au over 0.65m from 76.5 to 77.15m (sample BDO17234), C) Quartz breccia with
overprint of very coarse pyrite. From KSD027 assay interval of 175 g/t Au over 0.55m from 77.15 to 77.7m (sample
BDO17235).
IDENBURG PROJECT
SUA PROSPECT - BONANZA GRADES EXTENDED
FAR EAST GOLD ASX ANNOUNCEMENT 9
Table 3: Individual gold assay results for the interval 73.85m to 78.7m in KSD027.Refer to Table 2. As previously reported,
mineralisation in the Sua prospect is associated with intensely deformed metadiorite host rock and quartz veins with
abundant coarse pyrite in veins and rock matrix. Multiple episodes of deformation and sulphide formation are evident.
The occurrence of coarse gold has also been reported.
Figure 5 : Interpreted long section (looking Northwest) showing the trace of FEG holes KSD023 to 027 and historical
holes. Refer to Tables 1, 2and 3. The holes tested separate, stacked mineralised zones along the length of the Sua prospect
area. Assays are pending for holes KSD028-029. The collars for FEG holes KSD025-026 were located at a higher elevation
than the section profile and have been projected onto the section. Refer to Company’s ASX announcement of October 12,
2025, for a complete list of significant intersections for the Sua historical drillholes. Coordinates are referenced to datum
WGS84, zone 54 south.
IDENBURG PROJECT
SUA PROSPECT - BONANZA GRADES EXTENDED
FAR EAST GOLD ASX ANNOUNCEMENT 10
Based on the results of the completed drilling at Sua, future drilling is planned to test extensions of
the mineralised zones down-dip and along strike, with the aim of assessing the potential to increase
the current Sua Mineral Resource estimate.
An infill drill program is also under consideration in order to upgrade the current JORC inferred
resource to indicated classification. The ongoing surface mapping program over the Kwaplu prospect
along strike to the southwest of Sua will define targets for an initial scout drill program.
COMPETENT PERSON’S STATEMENT
The information in this announcement that relates to exploration results (Including JORC Tables) is
based on and fairly represents information and supporting documentation prepared, reviewed and
approved by Mr Michael C Corey, a competent person who is a member of the Association of
Professional Geoscientists of Ontario (APGO), Canada. Mr Michael C Corey is employed on a
consulting basis by Far East Gold Limited as the General Manager of Exploration. Mr Michael C Corey
has sufficient experience which is relevant to the style of mineralization and type of deposits under
consideration and to the activity being undertaken to qualify as a Competent Person as defined in the
2012 edition of the JORC Code. Mr Michael C Corey has provided his prior written consent as to the
form and context in which the exploration results and the supporting information are presented in this
announcement.
The information referenced in this announcement that is based on the results and interpretation of
historical exploration within the Idenburg COW was compiled and reported by SMG Consultants in the
reports entitled: PT Iriana Mutiara Idenburg Exploration Target Report June 2024’ and ‘JORC
Resource Report, PT Iriana Mutiara Idenburg, November 2024’. The Company confirms that it is not
aware of any information or data that materially affects the information included and previously
released in the market announcements referenced herein, and that all material assumptions and
technical parameters underpinning the announcements continue to apply. The Company confirms that
the form and context in which the Competent Person’s findings are presented have not been materially
modified from the original market announcements.
IDENBURG PROJECT
SUA PROSPECT - BONANZA GRADES EXTENDED
FAR EAST GOLD ASX ANNOUNCEMENT 11
APPENDIX 1
Idenburg Mineral Resource Statement
The Company confirms that it is not aware of any new information or data that materially affects the
information included in the Idenburg Mineral Resource estimate and all material assumptions and
technical parameters underpinning the inferred mineral resource estimate continue to apply and have
not materially changed when referring to its resource announcement made on 16 December 2024
“Amended Idenburg Announcement and Independent JORC Resource Report”. The Company
confirms that the Competent Persons’s findings are presented and have not been materially modified
from the original market announcement.
Table 1 (Appendix 1): Mineral Resource table as estimated by SMGC based on historical exploration data
using a cut-off grade of 0.1 g/t Au with no grade capping applied to the IMI historical assays. The resource
tonnage is estimated based on a specific gravity of 2.8 t/m3. Gold recovery of 90% was based on historical
preliminary metallurgical testing completed on Sua drill core composites.
A ‘Mineral Resource’ is a concentration or occurrence of material of intrinsic economic interest in or
on the Earth’s crust in such form, quality and quantity that there are reasonable prospects for eventual
economic extraction. The location, quantity, grade, geological characteristics and continuity of a
Mineral Resource are known, estimated or interpreted from specific geological evidence and
knowledge. Mineral Resources are sub- divided, in order of increasing geological confidence, into
Inferred, Indicated and Measured categories (2012 JORC Code).
An ‘Inferred Mineral Resource’ is that part of a Mineral Resource for which quantity and grade (or
quality) are estimated on the basis of limited geological evidence and sampling. Geological evidence
is sufficient to imply but not verify geological and grade (or quality) continuity. It is based on
exploration, sampling and testing information gathered through appropriate techniques from locations
such as outcrops, trenches, pits, workings and drill holes. An Inferred Mineral Resource has a lower
level of confidence than that applying to an Indicated Mineral Resource and must not be converted to
an Ore Reserve. It is reasonably expected that the majority of Inferred Mineral Resources could be
upgraded to Indicated Mineral Resources with continued exploration.
IDENBURG PROJECT
SUA PROSPECT - BONANZA GRADES EXTENDED
FAR EAST GOLD ASX ANNOUNCEMENT 12
ABOUT FAR EAST GOLD
Far East Gold Limited (ASX:FEG) is an ASX listed copper/gold exploration company with six
advanced projects in Australia and Indonesia. This Release has been approved by the FEG Board of
Directors.
FURTHER INFORMATION
Sign up to the Far East Gold investor hub to receive important news and updates directly to your inbox,
and to engage directly with our team: https://investorhub.fareast.gold/auth/signup
COMPANY ENQUIRIES
Justin Werner
Chairman
Shane Menere
Chief Executive Officer
Tim Young
Investor Relations & Capital Markets
e: justin.werner@fareast.gold e: shane.mener@fareast.gold
m: + 61 406 189 672
m: + 62 811 860 8378
e: tim.young@fareast.gold
m: + 61 484 247 771
1
ATTACHMENT 1
JORC Code, 2012 Edition – Table 1
Section 1 Sampling Techniques and Data
(Criteria in this section apply to all succeeding sections.)
Criteria JORC Code explanation Commentary
Sampling
techniques
• Nature and quality of sampling (eg cut
channels, random chips, or specific
specialised industry standard measurement
tools appropriate to the minerals under
investigation, such as down-hole gamma
sondes, or handheld XRF instruments, etc).
These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any measurement
tools or systems used.
• Aspects of the determination of mineralisation
that are Material to the Public Report.
• In cases where ‘industry standard’ work has
been completed this would be relatively simple
(eg ‘reverse circulation drilling was used to
obtain 1 m samples from which 3 kg was
pulverised to produce a 30 g charge for fire
assay’). In other cases more explanation may be
required, such as where there is coarse gold that
has inherent sampling problems. Unusual
commodities or mineralisation types (eg
submarine nodules) may warrant disclosure of
detailed information.
• All Sua drill core is digitally photographed and
logged by FEG project geologists. Core with any
potential for mineralisation was marked up for
sampling and despatched to an analytical
laboratory for geochemical analysis. Only
visually obvious non-mineralised core was not
sampled.
• Cut, half core was selected for geochemical
analysis.
• The drill core sample intervals range from
0.5 to 1.50 m in length.
• All half core samples were jaw-crushed and split
onsite in the Company operated core facility.
Sample packets of 500g were put into woven
polysacks by site personnel and air freighted to
PT.Geoservices in Bekasi, West Java,
Indonesia.
• Additional sample preparation and assays were
undertaken by the independent Pt. Geoservices
laboratory in Bekasi, Indonesia.
• Gold analyses of all drill core samples were by
fire assay with atomic absorption spectrometry
(AAS) finish of a 50g sample, with a detection
limit of 0.01 g/t Au (method FAA50).
• For the determination of base metal AAS
analytes the GAI02_ICP analytical methos – with
detection limits of Ag (0.5 ppm) and Cu, Pb, Zn
(each 5 ppm) and 1 ppm detection limit for As.
Drilling
techniques
• Drill type (eg core, reverse circulation, open-hole
hammer, rotary air blast, auger, Bangka, sonic,
etc) and details (eg core diameter, triple or
standard tube, depth of diamond tails, face-
sampling bit or other type, whether core is
oriented and if so, by what method, etc).
• Triple tube diamond core drilling – fully drilled with
diamond bit with PQ collar.
• Core diameter was mostly HQ, reducing to NQ at
depth.
• Down-hole surveying was routinely conducted at 30
m intervals.
• Core orientation was measured using a MagCruiser
MM105 from Stockholm Precision Tools.
• Core was fitted together and marked up for
sampling by a geologist, and where loose
fragments were seen core was wrapped in masking
tape prior to the core sawn in half.
Drill sample
recovery
• Method of recording and assessing core and
chip sample recoveries and results assessed.
• Measures taken to maximise sample recovery
and ensure representative nature of the samples.
• Whether a relationship exists between sample
recovery and grade and whether sample bias
• All core sample recovery recorded in both hard
copy and digital logging sheets and recovery
results assessed by project geologists.
• No significant drilling problems encountered
resulted in very good core recoveries.
• Statistical analyses indicate no relationship
between grade and recovery.
2
Criteria JORC Code explanation Commentary
may have occurred due to preferential loss/gain
of fine/coarse material.
Logging
• Whether core and chip samples have been
geologically and geotechnically logged to a level
of detail to support appropriate Mineral Resource
estimation, mining studies and metallurgical
studies.
• Whether logging is qualitative or quantitative in
nature. Core (or costean, channel, etc)
photography.
• The total length and percentage of the relevant
intersections logged.
• All drill holes were logged by geologists.
• All logging data recorded intervals from and to,
including lithology, mineralisation, alteration,
sulphides seen, detailed structure and geotechnical
characteristics.
• All core was photographed both dry and wet.
• All samples that were identified as having any
potential mineralisation were assayed.
Sub-sampling
techniques
and sample
preparation
• If core, whether cut or sawn and whether quarter,
half or all core taken.
• If non-core, whether riffled, tube sampled, rotary
split, etc and whether sampled wet or dry.
• For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
• Quality control procedures adopted for all sub-
sampling stages to maximise representivity of
samples.
• Measures taken to ensure that the sampling is
representative of the in-situ material collected,
including for instance results for field
duplicate/second-half sampling.
• Whether sample sizes are appropriate to the
grain size of the material being sampled.
• Core samples were logged and all intervals for
analysis were marked up by FEG geologists, at 0.5
and 1 metre intervals.
• Core samples for analyses were cut into half and
collected by experienced FEG personnel.
• drill core sample intervals range from 0.5 to 1.5 m
in core length.
• Selected quarter core samples were assayed for
quality assurance and quality control analysis as
field duplicates.
Quality of
assay data
and
laboratory
tests
• The nature, quality and appropriateness of the
assaying and laboratory procedures used and
whether the technique is considered partial or
total.
• For geophysical tools, spectrometers, handheld
XRF instruments, etc, the parameters used in
determining the analysis including instrument
make and model, reading times, calibrations
factors applied and their derivation, etc.
• Nature of quality control procedures adopted (eg
standards, blanks, duplicates, external
laboratory checks) and whether acceptable
levels of accuracy (ie lack of bias) and precision
have been established.
• All samples were despatched to the independent
laboratory Pt.Geoservices in Bekasi
• Certified reference samples and blank and field
duplicate samples were submitted at a rate of one
each per 20 samples.
Verification
of sampling
and assaying
• The verification of significant intersections by
either independent or alternative company
personnel.
• The use of twinned holes.
• Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
• Discuss any adjustment to assay data.
• Data entry involves constructing Excel and Access
spreadsheets directly from final laboratory assay
reports delivered electronically in PDF and Excel
format.
• Database verified by FEG exploration manager,
including all significant drill intersections.
• Data stored in company server located in Jakarta,
Indonesia.
Location of
data points
• Accuracy and quality of surveys used to locate
drill holes (collar and down-hole surveys),
trenches, mine workings and other locations
used in Mineral Resource estimation.
• Drilling and surface rock sampling grid (Northing,
Easting and elevation) was established with
handheld GPS control and tape and compass
surveyed in the rugged terrain.
3
Criteria JORC Code explanation Commentary
• Specification of the grid system used.
• Quality and adequacy of topographic control.
• Drill hole collars and all sample points will be picked
up by contract surveyor at completion of drilling
program.
• The existing topographic survey is considered
adequate for the current DTM. Minor local
discrepancies are evident and further survey work
will be required should further Resource definition
ensue.
• Grid system used is Universal Transverse Mercator
(WGS 84) UTM Zone 54, Southern Hemisphere.
Data spacing
and
distribution
• Data spacing for reporting of Exploration Results.
• Whether the data spacing and distribution is
sufficient to establish the degree of geological
and grade continuity appropriate for the Mineral
Resource and Ore Reserve estimation
procedure(s) and classifications applied.
• Whether sample compositing has been applied.
• Drill hole spacing and drill section spacing was as
close to 100 m as the rugged ground conditions
allowed.
• Drilling has verified the historical mapping and
trenching that identified intense shear and fault
related deformation.
• Samples are not composited for analysis.
Orientation of
data in
relation to
geological
structure
• Whether the orientation of sampling achieves
unbiased sampling of possible structures and the
extent to which this is known, considering the
deposit type.
• If the relationship between the drilling orientation
and the orientation of key mineralised structures
is considered to have introduced a sampling
bias, this should be assessed and reported if
material.
• Drill sections are oriented perpendicular to main
strike of shallow dipping vein structures.
• Most holes were drilled on section.
• Vertical and mostly inclined holes were drilled,
depending on the interpreted orientation of the
shear/fault zone hosting the mineralisation.
• The orientation of the drilling is considered
adequate for an unbiased assessment with respect
to interpreted structural controls of mineralisation.
Sample
security
• The measures taken to ensure sample security. • All drill core samples were packed on site into
polysacks by experienced FEG personnel before
being delivered to a logistic depot near Jayapura
airport and air-freighted to Jakarta, Indonesia.
• Initial coarse crushing and sample split was
undertaken by trained FEG technicians at Senggi
core facility. Additional sample preparation and
assaying was completed at the PT. Geoservices
laboratory in Bekasi, Indonesia.
• Pulps and coarse rejects will be stored at the PT.
Geoservices
Audits or
reviews
• The results of any audits or reviews of sampling
techniques and data.
• Sampling procedures and data collection are
frequently reviewed by FEG exploration staff. No
independent audit of sampling methodologies has
been done.
4
Section 2 Reporting of Exploration Results
(Criteria listed in the preceding section also apply to this section.)
Criteria JORC Code explanation Commentary
Mineral
tenement and
land tenure
status
• Type, reference name/number, location and
ownership including agreements or material
issues with third parties such as joint ventures,
partnerships, overriding royalties, native title
interests, historical sites, wilderness or national
park and environmental settings.
• The security of the tenure held at the time of
reporting along with any known impediments to
obtaining a license to operate in the area.
• A 6th generation Contract of Work (COW)
between PT. Iriana Mutiara Idenburg (IMI)
and the Government of the Republic of
Indonesia signed on 28 April 1997
• Project Area covers 95,280 hectares.
• No further partial relinquishments required.
• COW currently in Exploration Period.
• 30 year production period with possible 2 x
10 year extensions.
• Obligations and commitments governed by
COW amended to conform to 2009 Mining
Law.
Exploration
done by other
Share your feedback
Discover